Seymour duncan pickup dating

You should not attempt to adjust the truss rod, unless you are qualified to do so. At this time ESP does not sell replacement necks, and replacements are only available under a warranty basis. If your neck broke due to a non-warranty issue, you should find a professional repairperson and see if the neck can be repaired or replaced. Set-neck construction joins the neck and body with glue at a tightly fitted joint. Tonally this construction is considered to be warmer, as you will obtain the tone in a combination from the separate neck and body woods. However this will also depend on the wood chosen to construct each piece.

This type of joint has a traditional feel around the neck heel. Bolt-on construction was originally developed as a way to be able to produce guitars more efficiently and make them more affordable. The neck and body are bolted together using 4 or more screws and either a neck plate or screw inserts that hold the neck to the body.

Tonally, a bolt-on guitar will have less sustain compared to both neck-thru and set-neck guitars, but it has its other advantages.

Seymour Duncan Pickups | eBay

Since the neck comes off the body, it can be removed, adjusted, repaired and replaced with more ease than a set-neck or neck-thru guitar. Neck-thru-body construction utilizes the same piece of wood for the neck and the center column of the body.

Gibson HB covers vs. Duncans

The guitar's body is made up of this center column often referred to as the tone column and the body "wings", which are additional pieces of wood glued to the center column to make the body shape. Since the neck and body are all connected through this one piece of wood, the tone transfer from neck to body is much better than a guitar with a bolt-on or glued-on neck. Neck-thru guitars have a lot of sustain because of the tonal properties of the wood used for the center column, which is usually maple.

Guild Full-Sized HB1 and SD1 Pickup Variations

Therefore, most neck-thru guitars tend to have a very bright sound with lots of sustain. Set-thru neck construction is an innovative technique in which the neck is glued to the body like a set-neck , however the traditional bulky heel is carved away similar to neck-thru-body construction. This makes access to the upper frets and the neck-to-body transition much smoother. Just as on a set-neck, you will get a combination of tone from both the neck and body with the set-thru construction. The sound will depend on the types of wood used, but generally will have a fuller, warmer tone when compared to most neck-thru-body guitars.

ESP can only suggest retail prices for new instruments currently in production. The current value of an older instrument is something that can vary due to popularity, supply, and demand. We cannot estimate this type of value for an older instrument. If you can't identify your instrument, please send an e-mail to customerservice espguitars.

We will do our best to assist you with identification of your instrument s. Please provide ESP with digital pictures to help in identifying your guitar. Please note that this applies only for models sold in the USA. We cannot give production numbers or figures showing how many of a particular model were made. Please allow 48 hours minimum for a reply. You are welcome to e-mail customerservice espguitars. Only the guitars in our current catalog and website are still in production.

1985 Seymour Duncan DDJ value?

ESP maintains limited production records. If you would like to send us the following information, we will do our best to help you with your request. We cannot guarantee that we will be able to date your instrument, but we will try to help! We are unable to provide documentation declaring the authenticity of an ESP instrument. If you do not send pictures, chances are we will not be able to assist you with your request.

Re: Old Seymour Duncan Pickups

ESP is very interested in your opinions regarding our products. Comments can be e-mailed to customerservice espguitars. Please understand that due to the high volume of email, we cannot offer a personal response to every e-mail we receive. Written comments may be sent to: ESP does not sell replacement parts at this time. All current ESP instruments use industry standard metric guitar parts, and comparable after market parts can be purchased from most any parts suppliers or retailers.

Here are a few places to buy parts:. This bridge would have "ESP" and "Licensed" stamped on the bridge with a series of patent numbers. ESP can no longer provide parts for this bridge as production was discontinued in the early 's.

Pickup Shootout - Schecter, Seymour Duncan & Bare Knuckle

ESP does not reproduce or sell pickguards at this time. ESP does not sell necks or bodies separately. To receive Warranty Replacement parts, you must provide Proof of Purchase. Please remove or replace such wording and instead of making proclamations about a subject's importance, use facts and attribution to demonstrate that importance. September Learn how and when to remove this template message.

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources.


  • The Factory Tour?
  • what to expect when dating a brazilian man?
  • matchmaking destiny vault of glass?
  • Old Seymour Duncan Pickups.
  • australia dating site 100 free?
  • File:Seymour Duncan Pickup Types.jpg?

Unsourced material may be challenged and removed. March Learn how and when to remove this template message. Archived from the original on Retrieved from " https: Webarchive template wayback links Articles with peacock terms from September All articles with peacock terms Articles needing additional references from March All articles needing additional references.


  1. Old Seymour Duncan Pickups.
  2. Seymour Duncan - Wikipedia.
  3. Seymour Duncan?
  4. Views Read Edit View history. Also - it's a Duncan Distortion, SH-6b bridge - regardless of whether or not it was wound by Marciela J or no J, its a Duncan Distortion Just dawned on me that I could sent these photos to Seymour Duncam customer service I had read the Duncan Distortion was first made in 80, she started in 83, so if it's one of hers, it's probably a very early one.

    I don't think the prices are too unrealistic, magnets age, wax potting settles, it changes the sound. U can look it up on eBay and refine the search to only sold items and see what they've actually sold for too, that would give you an idea. That propably doesn't help at all with putting a date on the pickup, who knows when the partscaster was put together.

    Not sure about the body - there's no markings. It appears to be solid wood not laminate , but has a funky sort of red to black sunburst with all solid colors. That's a tough one with the body, have u tried scrapping the paint to see if there's any markings at the neck pocket? It wouldn't surprise me to find out it's an older body, the depth of the contours are a good indicator of that. I can't really tell much from the pictures.

    It's a shame it has those routes in the back though.