Hook up nest thermostat

The Nest Thermostat E might cost less than some other smart thermostats, but it's not exactly cheap either. We put one in our own home to find out. You get some of this money back by way of built-in energy saving features, in the US, there's a credit from energy companies that can make the device nearly free. The device, unlike the standard Nest Learning Thermostat, is white — complete with a slightly frosted display.

The circular build has always served the Nest well, and it would be strange to see Nest adopt a different form-factor. The puck-shaped device is a little smaller than the original Nest Learning Thermostat, coming in at 3.

1. Add a solid state relay

As mentioned, perhaps the biggest design difference between Nests has to do with the frosted, lower resolution display. The frosted display makes the Thermostat E slightly harder to read in better-lit situations. All these downsides, however, are small ones. The lack of Farsight is a small loss, but only a minor one especially because the thermostat will still show temperature-related information because of the proximity sensor.

How to install the Nest Learning Thermostat - CNET

But what's a modern thermostat without Internet capabilities? With a one-time setup, Nest connects to your Wi-Fi, allowing you to remotely adjust your temperature using any smartphone or Web browser from afar. Ultimately, the Nest will attempt to help you cut costs on heating and cooling, all the while making your home a little greener. When you're saving energy, a small green leaf will appear on the display. It requires that you remove your thermostat which is easy and take a look at some of the wiring.

How to Install a 2nd Generation Nest Thermostat

If you're confused, play the video at the bottom of the survey to get visual instructions for checking your current wiring. Once your Nest thermostat is all set up, and you've set the temperature, it'll begin "learning" immediately. Over the next seven days, the Nest will collect data about the way you adjust your heating or cooling, and only then will it begin giving you smart feedback to help you conserve energy. The final step is to set up your Nest account so that you can control your thermostat while you're away from home.

So, if you're on your way home on a cold, blustery evening, you can set Nest to start heating so that your home is toasty by the time you arrive. To pair your mobile device Android or iPhone with Nest, download the Nest app. Press the button in the middle of the Heat Link to manually complete the circuit; the solid state relay should light up red to show it's working.

If it's not, turn off the power. Check the connections to the Heat Link and make sure that they're secure. If they are, you could have the control side of the solid state relay wired up the wrong way.

Price and release date

Disconnect both wires from the relay and swap them around. With this part working, you can close the Nest Heat Link's lid and secure it in place. Cut off the plug that it shipped with and strip the live, neutral and earth cables. You'll need to wire up a new 13A plug and flex cable to act as the power input. Give yourself enough cable so that you can place the junction box where you want it, and strip the ends of the three cables inside.

On one side of the junction box, run in the cable that's connected to the new plug, taking it through a gland. Wire the live wire into one of the solid state relay's output terminals it doesn't matter which one. The earth and neutral cables need to be taken into a junction box - I've used a 20A junction box, but you'll need a higher-rated one for controlling more than one radiator. On the other side of the junction box, thread in the radiator's power cable.

Connect its live power cable to the spare output terminal on the solid state relay. Join the live and neutral cables to the input's live and neutral cables inside the junction box. Close the junction box. To test, plug in the Heat Link, power adaptor and radiator plugs and turn them on. Tap the middle button on the Heat Link, and the control circuit is completed, turning the relay on; in turn, this completes the circuit to the radiator, powering it on. Tap the button to turn off your heating.

  • Your Answer?
  • define relative dating and radiometric dating.
  • How to install the Nest Learning Thermostat;
  • type 3 chi-nu kai matchmaking.
  • How to install the Nest Learning Thermostat - CNET;

Place your radiator and junction box where you need them, and power them on. You can now follow the instructions to get your Nest Thermostat working, placing it where you want. From the Thermostat, I recommend setting your heating type to electric.